Low-voltage ESS
JN-ES-LFP24V280-LD
25.6 V / 280 Ah / 7.168 kWh
A 25.6 V, 280 Ah floor-standing LiFePO4 battery with 7.168 kWh nominal energy for compatible 24 V storage projects.
Specifications are taken from the supplied product materials. Confirm the current production revision and project compatibility before commissioning.
24 V floor-standing home battery
Nominal energy7.168 kWh
Nominal voltage25.6 V
Nominal capacity280 Ah
Maximum continuous discharge current200 A
Floor-standing format
LCD display for battery status
24 V floor-standing home battery
This floor-standing model combines a 25.6 V battery with 280 Ah capacity, giving 7.168 kWh nominal energy. Its continuous charge and discharge limit is 200 A. The 493 × 282 × 596 mm enclosure weighs 135 kg, so mounting space and handling should be reviewed during project planning.
Typical applications
Match the format to the site.
01Home solar energy storage
02Selected-load backup
03Installer-led storage projects
Technical data
Electrical ratings, dimensions and operating limits for this model. Battery energy and inverter power are listed separately where applicable.
| Nominal energy | 7.168 kWh |
|---|---|
| Nominal voltage | 25.6 V |
| Nominal capacity | 280 Ah |
| Maximum continuous discharge current | 200 A |
| Maximum continuous charge current | 200 A |
| Standard charge current | 100 A |
| Standard discharge current | 100 A |
| Charge voltage | 29.2 V |
| Discharge cutoff voltage | 21.6 V |
| Charge temperature | 0–55°C |
| Discharge temperature | −20–55°C |
| Dimensions (L × W × H) | 493 × 282 × 596 mm |
| Net weight | 135 kg |
| Internal resistance | ≤30 mΩ |
| Cycle life | 3,000 cycles ≥80% initial capacity |
| Parallel connection | Supported; series connection is not supported |
| BMS protection | Short circuit, overcurrent and temperature protection |
| Battery chemistry | LiFePO4 |
| Charge mode | CC-CV |
Questions about this model
What are the nominal battery ratings?
A 25.6 V, 280 Ah floor-standing LiFePO4 battery with 7.168 kWh nominal energy for compatible 24 V storage projects.
How should inverter compatibility be checked?
Match the exact voltage range, BMS protocol, charging limits and installation conditions. A brand name alone does not establish compatibility.
What should be confirmed before installation?
Use the operating limits below and confirm the current wiring and installation manual with JUNEXT before commissioning.
Is this a 24 V or a 48 V battery system?
It is a 24 V class storage battery with a nominal voltage of 25.6 V. Its 280 Ah capacity corresponds to 7.168 kWh nominal energy. Check the inverter voltage range before selection.
Technical resources
One model. One verified document set.
Technical documents are available from JUNEXT on request. Confirm the product revision before installation.
Request current datasheetREQUESTCheck inverter compatibilityREQUESTAsk for installation guidanceREQUESTContinue through the range.
Compare products in the same battery or inverter direction before confirming the exact system architecture.
Is JN-ES-LFP24V280-LD right for this project?
Share the destination market, essential loads, target backup time and inverter information. Juneng will help your installer validate the product direction.
Build a project brief