Stacked all-in-one ESS
LFP48100-D
6 kW / 15.36 kWh
A stacked home energy storage system with a 6 kW inverter and three 51.2 V, 100 Ah LiFePO4 battery modules, providing 15.36 kWh nominal battery energy.
Specifications are taken from the supplied product materials. Confirm the current production revision and project compatibility before commissioning.
6 kW stacked storage system
System nominal battery energy15.36 kWh
Inverter rated output6,000 W
Battery modules in the main configuration3
Battery module energy5.12 kWh
LiFePO4 cells with BMS protection
Floor-standing format with integrated wheels
6 kW stacked storage system
The main LFP48100-D configuration pairs a 6 kW inverter with three 5.12 kWh battery modules. The resulting nominal battery energy is 15.36 kWh. The specification table distinguishes whole-system energy, inverter limits and individual battery-module dimensions and weight.
Typical applications
Match the format to the site.
01Home solar energy storage
02Selected-load backup
03Installer-led storage projects
Technical data
Electrical ratings, dimensions and operating limits for this model. Battery energy and inverter power are listed separately where applicable.
| System nominal battery energy | 15.36 kWh |
|---|---|
| Inverter rated output | 6,000 W |
| Battery modules in the main configuration | 3 |
| Battery module energy | 5.12 kWh |
| Battery module voltage | 51.2 V |
| Battery module capacity | 100 Ah |
| Inverter surge output | 11,000 VA |
| Inverter PV input limit | 5,500 W |
| Inverter MPPT voltage range | 120–450 VDC |
| Inverter PV open circuit limit | 500 VDC |
| Inverter transfer time | 20 ms (home appliances) |
| Charge voltage | 57.6 V |
| Discharge cutoff voltage | 42.4 V |
| Standard charge current | 50 A |
| Standard discharge current | 50 A |
| Maximum continuous charge current | 100 A |
| Maximum continuous discharge current | 100 A |
| Charge temperature | 0–45°C |
| Discharge temperature | −20–55°C |
| Battery module dimensions | 600 × 400 × 188 mm |
| Battery module net weight | 45 ±5 kg |
| IP rating | IP20 |
| Battery chemistry | LiFePO4 |
| Charge mode | CC-CV |
Questions about this model
What are the nominal battery ratings?
A stacked home energy storage system with a 6 kW inverter and three 51.2 V, 100 Ah LiFePO4 battery modules, providing 15.36 kWh nominal battery energy.
How should inverter compatibility be checked?
Match the exact voltage range, BMS protocol, charging limits and installation conditions. A brand name alone does not establish compatibility.
What should be confirmed before installation?
Use the operating limits below and confirm the current wiring and installation manual with JUNEXT before commissioning.
What is included in the main three-module configuration?
The main configuration combines a 6 kW inverter with three 5.12 kWh battery modules, for 15.36 kWh total nominal battery energy. Each battery module is rated at 51.2 V and 100 Ah.
How is the three-module battery energy calculated?
Three modules × 5.12 kWh = 15.36 kWh nominal battery energy. The 6 kW rating describes the inverter output, not battery energy. Dimensions and weight labelled as battery-module values apply to one module.
Technical resources
One model. One verified document set.
Technical documents are available from JUNEXT on request. Confirm the product revision before installation.
Request current datasheetREQUESTCheck inverter compatibilityREQUESTAsk for installation guidanceREQUESTContinue through the range.
Compare products in the same battery or inverter direction before confirming the exact system architecture.
Is LFP48100-D right for this project?
Share the destination market, essential loads, target backup time and inverter information. Juneng will help your installer validate the product direction.
Build a project brief