Stacked all-in-one ESS
LFP48100-C
51.2 V / 100 Ah / 5.12 kWh
A modular stacked LiFePO4 home battery built around 51.2 V, 100 Ah modules, with 5.12 kWh nominal energy per battery module.
Specifications are taken from the supplied product materials. Confirm the current production revision and project compatibility before commissioning.
Modular stacked home storage
Battery module energy5.12 kWh
Battery module voltage51.2 V
Battery module capacity100 Ah
Charge voltage58.4 V
Modular battery stack for capacity planning
Floor-standing format with integrated wheels
Modular stacked home storage
Plan the battery stack around the energy required by the site. Each LFP48100-C battery module is rated at 51.2 V, 100 Ah and 5.12 kWh; the published dimensions and 50 kg weight refer to one module. Parallel connection is supported, while series connection is not.
Typical applications
Match the format to the site.
01Home solar energy storage
02Selected-load backup
03Installer-led storage projects
Technical data
Electrical ratings, dimensions and operating limits for this model. Battery energy and inverter power are listed separately where applicable.
| Battery module energy | 5.12 kWh |
|---|---|
| Battery module voltage | 51.2 V |
| Battery module capacity | 100 Ah |
| Charge voltage | 58.4 V |
| Discharge cutoff voltage | 40.0 V |
| Maximum continuous charge current | 100 A |
| Maximum continuous discharge current | 100 A |
| Standard charge current | 50 A |
| Standard discharge current | 50 A |
| Charge temperature | 0–55°C |
| Discharge temperature | −20–55°C |
| Battery module dimensions | ≤600 × ≤450 × ≤216.5 mm |
| Battery module net weight | 50 kg |
| Internal resistance | ≤30 mΩ |
| Battery cycle life | 3,000 cycles ≥80% initial capacity |
| Parallel connection | Supported; series connection is not supported |
| BMS protection | Short circuit, overcurrent and temperature protection |
| Battery chemistry | LiFePO4 |
| Charge mode | CC-CV |
Questions about this model
What are the nominal battery ratings?
A modular stacked LiFePO4 home battery built around 51.2 V, 100 Ah modules, with 5.12 kWh nominal energy per battery module.
How should inverter compatibility be checked?
Match the exact voltage range, BMS protocol, charging limits and installation conditions. A brand name alone does not establish compatibility.
What should be confirmed before installation?
Use the operating limits below and confirm the current wiring and installation manual with JUNEXT before commissioning.
Does 5.12 kWh describe one battery module or the complete stack?
The 5.12 kWh rating applies to one 51.2 V, 100 Ah battery module. Confirm the module quantity for the complete system; series connection is not supported.
Does 5.12 kWh describe one module or the complete stack?
5.12 kWh is the nominal energy of one 51.2 V, 100 Ah battery module. It does not describe an unspecified complete stack. Confirm the required module quantity with JUNEXT.
Technical resources
One model. One verified document set.
Technical documents are available from JUNEXT on request. Confirm the product revision before installation.
Request current datasheetREQUESTCheck inverter compatibilityREQUESTAsk for installation guidanceREQUESTContinue through the range.
Compare products in the same battery or inverter direction before confirming the exact system architecture.
Is LFP48100-C right for this project?
Share the destination market, essential loads, target backup time and inverter information. Juneng will help your installer validate the product direction.
Build a project brief